|
|
Diving Industry
Hydro Group is a world leader in the supply of critical "life support" products to the "offshore" and "onshore" "Diving Industry" We are the preferred supplier of DNV Approved Electrical "Diving Bell" & "DDC" Penetrators for Communication & Video and "Diving Bell" and "DDC" Penetrators for Scrubber & Heater Power.
Diver Comms (Communications) cable as used in surface supplied diving umbilical make up with load bearing strength member. Diver Video Camera Cable with 75 Ohm coaxial, power cores and twisted screened pairs to contol focus and Pan & Tilt. Underwater Mateable (wet mateable) electrical connectors for power and communication applications that can be mated subsea, underwater and then energized.
Our Hydro Bond Engineering HPS penetrators for saturation diving systems incorporate shear notch technology in their design which is required for diving bell DNV approval. A wide range of insert configurations for power and comms applications is available and you can nominate the length and type of polyurethane jacketed outboard cable and the length and type of Radox low smoke zero halogen inboard tails. All our penetrators are Helium leak tested at our factory prior to shipment.
|
|
|
"Should you trust your life to anything less than a DNV Certified Hydro Bond Engineering HPS Penetrator"
|
|
|
|
|
Aerostat Cables
Tethered Aerostats are unmanned non rigid lighter than air vehicles sometimes referred to as 'blimps'. These Aerostats remain anchored to the ground by a thether cable. This tether cable provides electrical power to the platforms systems, as well as radar, infrared , CCTV, etc via fibre optics (fiber optics).
Click here for more info
|
|
|
|
|
|
C200 Encapsulation Polyurethane
The C200 Encapsulating Rubber which Hydro Bond use for moulding cable splices and overmoulding connector housings etc. is a polyetherurethane rubber. This particular material is heat cured with a diamine based compound to form a polyetherurethane rubber with outstanding physical properties.
Click here for more info
|
|
|
|
|
|
Cathodic Delamination Protection
Hydrobond Engineering offer an enhancement to our products called ‘Cathodic Delamination Protection’ (CDP), the process has been developed specifically for use in assemblies used in systems (such as submarines) that are not permanently grounded.
Click here for more info
|
|
|
|
|
|
Cathodic Protection Cables
Cathodic Protection Cable is a multi stranded tinned copper conductor insulated with high density polyethelene (HDPE) or cross linked polyethelene. These materials provide excellent abrasion, crush, chemical, oil and water resistance.
Click here for more info
|
|
|
|
|
|
Custom Design Polyurethane Moulding
Since 1982 Hydro Bond Engineering has supplied the Defence and Oil/Gas markets with engineereed polyurethane composite products. Our experience and capability is available to provide both new and existing product requirements, with high value custom moulding services in various superior urethanes.
Click here for more info
|
|
|
|
|
|
Deep Water Vibration Transducer
For underwater gas compression. Suitable for 8000 FSW continuous duty. With most of the easy hydrocarbons already produced or nationally closed to free market development, it is necessary for oil producers to go to deep water recovery techniques for field development.
Click here for more info
|
|
|
|
|
|
Diver Comms Cables
Hydrocable Systems Ltd is the preferred supplier of subsea Diver Comms cable to surface supplied and bell diver umbilical manufacturers worldwide. Our comms cable designs can have twisted screened pairs to avoid cross talk between pairs and our cable interstices are water blocked to help exclude water should the external sheath be nicked.
Click here for more info
|
|
|
|
|
|
Diver Video Cables
Hydrocable Systems Ltd has been manufacturing Subsea Diver Video Cable for over 20 years and our CS 382 Cable has become an industry standard with stranded inner coax core to assure good flexibility, Water Blocked Cable Interstices, Twisted Screened Pairs (TSP's) for Power, Pan & Tilt and Focus so that no Electro Magnetic Interference (EMI) is seen on the video image.
Click here for more info
|
|
|
|
|
|
Dynamic Flow Line Control Cable
A dynamic flow line control cable or umbilical is designed to hang in a centenary form between a fixed structure or wellhead platform (WHP) and a floating structure (FPSO). This type of umbilical is normally low in weight with either contra helical armour or Aramid fibre to endure axial loading.
Click here for more info
|
|
|
|
|
|
EFP (Flameproof) Electrical Connector
The EFP series of electrical connectors is a comprehensive line of power, control and instrumentation electrical connector products. This series is certified for use in a Zone 1 IIC classified locations with IP67 environmental sealing characteristics.
Click here for more info
|
|
|
|
|
|
Electrical Testing Services
Hydro Group plc is pleased to offer a full range of in house and field Electrical test services.
Our Quality Assurance Department and trained technicians are able to carry out fast accurate fault finding in your supplied connector and cable assemblies. A full report is then generated stating the repair recommendations and is accompanied by a formal written quotation detailing the costs associated with the rectification of your equipment.
Click here for more info
|
|
|
|
|
|
Engineering Services
Hydrobond Engineering is able to offer the services of our in house engineering design team to respond quickly to your non-standard applications.
Non-standard engineering requirements are handled quickly and efficiently through our sales department often at no initial cost to the customer. A viability study and concept drawings are produced with budgetary costs to allow the customer to quickly evaluate their project.
Click here for more info
|
|
|
|
|
|
Fibre-Link Penetrator
The Hydro Fibre-Link deep field Penetrator can operate at full Ocean pressure, namely 3,000 FSW (310 Bar). The design and construction of optical fibre penetrators can be limited due to cable design and construction.
Click here for more info
|
|
|
|
|
|
Field Service
Hydro Bond Engineering Ltd is pleased to offer a full range of field electrical, optical mechanical termination and moulding services.
We have several fully trained technicians available to support your electrical, optical, mechanical termination and moulding requirements locally, nationally and internationally.
Click here for more info
|
|
|
|
|
|
Hairy Fairing
When cables are used in underwater towing applications, the cable will oscillate or strum. This vibration of the cable can cause severe increase in the drag coefficient of the cable. As the cable is round, a vortex is created at the opposite face of the cable, reducing efficiency and increasing drag. A 'hairy fairing' will decrease hydrodynamic drag by 40%-60%, the 'hairy fairing' can be incorporated in a short length of cable, or for the entire length of the cable.
Click here for more info
|
|
|
|
|
|
HCC connectors
Surface Mateable, Depth rated to 2,440 MSW (8000 FSW), Bulkhead Mount design available as standard, Pin densities from 6 to 12 ways, Voltage ratings up to 1000 Volts, Current rating up to 8 Amps, Available in 316 Stainless Steel as standard, Optional Earth Bonding, Cathodic Delamination Protection as standard, Cable moulding options include Polyurethane and Polyethylene
Click here for more info
|
|
|
|
|
|
HMK Electrical Connectors
With the introduction of the HMK series in 1999 Hydro Bond Engineering Ltd has further enhanced the diver Wet Mateable Electrical Connector design to incorporate a full metal key way to assure non rotation of the connector body on make up. All the quality and benefits that you know with Hydro Bond products but with a metal key way.
Click here for more info
|
|
|
|
|
|
HRS Electrical Connectors
HYDRO BOND underwater mateable rubber sealing connectors are designed for deep sea applications down to 5000ft, (1524m). Each contact, cable and connector housing is chemically bonded into a synthetic rubber matrix.
Click here for more info
|
|
|
|
|
|
Kellems Pulling and Cable Support Grips
Cable pulling, positioning, routing and strain relief couldn't be easier. Kellems Wire Management products offer a complete source for all of your wire management issues. Many of the wire management products available today started out as Kellems exclusive designs.
Click here for more info
|
|
|
|
|
|
Main Lift Tether Cables
Many ROV systems are launched & recovered by a tether management system (TMS) Sometimes referred to as a “cage” or garage. The TMS offers a stable platform for the ROV to operate from, therefore the main lift cable supports the weight of the cage, the ROV, & ancillary equipment.
Click here for more info
|
|
|
|
|
|
Neutrally Buoyant Tether Cables
Underwater vehicles are normally tethered by an umbilical that supplies electrical power and fibre optics to transfer data. The umbilical tether also provides the physical link for launch and recovery of the vehicle, as well as the tracking and manoverability of the vehicle.
Click here for more info
|
|
|
|
|
|
Optical Testing Services
Hydrobond Engineering Ltd is pleased to offer a full range of in house and field fibre optic test services.
Our Optical Technicians are trained in Optical Fibre Installation and Testing (Single Mode Fibre) to City & Guilds standard. And several staff members are trained in Multimode Optical termination and Testing.
Click here for more info
|
|
|
|
|
|
Partial Discharge Free Connectors and Penetrators
Partial discharge is the name given to an electrical phenomenon which consists in the breakdown of an electrical insulation under high voltage levels.
The partial discharge process can be very hazardous to electrical components such as connectors, penetrators & other high voltage equipment in a sub-sea or surface environment.
Click here for more info
|
|
|
|
|
|
Polyethylene Moulding
Hydro Bond have been moulding, splicing polyethelen cables for over 25 years, originally the technique was developed in conjunction with the MOD (Ministry of Defence) at Foxhill as Polyethelene (PE) cables were used extensively on all UK submarines.
Click here for more info
|
|
|
|
|
|
R & D Department
Hydro Group has always attributed key strategic importance to research and development in the management and development of its business.
The Group maintains association with several Scottish Universities and research centres around the UK.
Click here for more info
|
|
|
|
|
|
Subsea Crawler Cables
Subsea crawler cables are similar to tether cables as they also link the vehicle to the control module, these cables provide electrical power, instrumentation, optical signal, & in some applications a hydraulic or air line.
Click here for more info
|
|
|
