|
|
EFP (Flameproof) Electrical Connector
|
The EFP series of electrical connectors is a comprehensive line of power, control and instrumentation electrical connector products. This series is certified for use in a Zone 1 IIC classified locations with IP67 environmental sealing characteristics.
EFP Series electrical connectors may be specified for use in Oil, Gas and Petro-Chemical applications, land based and offshore drilling systems and pharmaceutical grade applications.
Areas of application include power, control and instrumentation quick connection and disconnection in service.
This series is also readily available, with an extensive inventory to support small or large requirements. The EFP Series of connectors are designed for use with both single and multi conductor cable types and are designed for service in the most demanding environments. |
|
|
The connector bodies are manufactured from hard anodised aluminium. Alternative materials such as brass and stainless steel, nickel aluminium bronze and titanium are also available.
EFP Series connectors are designed for quick mating and unmating in service. Cable accommodations allow industrial, offshore, and petrochemical type cables to be terminated in various manners depending on the cable type as well as application and regulatory requirements.
Receptacles are available for panel or cable ‘in-line’ mounting. A square flanged receptacle with a potting adaptor can be installed into either an Eex ‘d’ flameproof, Eex ‘e’ increased safety or Eex ‘p’ purged type enclosure system. The contact termination methods available are solder, crimp or pressure termination depending on insert selection. Alternative contact materials and plating options are available. Silver plating, over copper contacts is the standard. |
|
