Underwater Connectors (Fibre Optic, Coaxial, Electrical) and Underwater Penetrators (Fibre Optic, Coaxial, Electrical) Custom Designed by Hydro Bond Engineering in Aberdeen.
  Home >> Products >> All Products >> Deep Water Vibration Transducer :
 Home
 Vision & Strategy
 Hydro Bond
 Hydro Cables
 Products &  Services
 Cables Stocklist
 Business  Opportunities
 Employment
 Exhibitions &  Conferences
 News
 Certification &  Documentation
 Contact Us
 Regional Offices
 Links

Deep Water Vibration Transducer
For underwater gas compression. Suitable for 8000 FSW continuous duty. With most of the easy hydrocarbons already produced or nationally closed to free market development, it is necessary for oil producers to go to deep water recovery techniques for field development.

Due to piping head losses associated with deep wells, its is necessary to place the pumping compressors underwater, near the well head in order to achive profitable flow rates. This vibration transmitter provides a reliable vibration signal for bearing monitoring applications in up to 8000 FSW.

The Deep Water Vibration Transducer is a good solution for continuously monitoring of underwater pumping & drilling apparatus. This case mounted vibration sensor is capable of providing 2 signals: A 2 wire loop powered tranmitter signal proportional to velocity that can be directly connected to a PLC, DCS or set point controller and a raw dynamic signal for secondary analysis purposes.
Deep Water Vibration Transducer

Specifications

Mechanical
Service : Continuous duty underwater.
Depth : 8,000 ft sea water maximum. (IP68, NEMA 6P)
Service temperature : -40 deg C to 100 deg C (-40 deg F to 212 deg F)
Vibration Range : 4-20ma output proportional to velocity
Raw Signal : Acceleration, 100mv,g
Accuracy : 2%
Axis orientation : Any
Seismic weight with mating connector : 925g
Mounted resonate frequency with 1/4 NPT stud mount: 5.5kHz minimum
Frequency response : 2-1200 Hz, unfiltered.

Materials

316SS, optionally titanium

Electrical

Electrical connection : 4 pin, wet mateable, open face, pressure rated connector.
Isolation : 500Vms circuit to case
Supply Voltage : 11-30vdc
Load Resistance : RL-50 x (Vsupply -11) ohms
Filters : high and low pass filters optionally available.
Cable jacket : polyurethane, optionally polyethylene.

Testing

Complete vibration and pressure testing services available. Please submit testing specifications for quote.


End Users - Diving , ROV / AUV , Oil & Gas , Defence , Oceanographic , Marine Renewables


Associated Datasheets
(in Internet Explorer right click on PDF icon and select "save target as" to download)

Deep Water Vibration Transducer

Hydro Bond Engineering Company VAT Registration Number : GB384575316
Hydro Cable Systems Company VAT Registration Number : GB502656564
DuPont™ and KEVLAR® are registered trademarks or trademarks of E.I. du Pont de Nemours and Company or its affiliates.
Hydro Bond Engineering - Manufacturer of custom made Underwater Connectors